782 Image Specifications

Image Quality

Specification

Value

Units

Notes

FPN

< 1

%

[1]

PRNU

< 3.5

%

[2]

Read Noise

< 2

DN

[3]

Dynamic Range

54

dB

[4]

 

 

Note

Camera Settings: 100ms integration time, 0dB gain, FFC on, 10 bit mode, Gamma off, Channel gains set to unity.

[1] Referenced with respect to 1023DN.

[2] Referenced with respect to frame mean

[3] Measured using the center 64X64 array of pixels over 32 frames.  The standard deviation of each pixel is used to create another 48X48 matrix, which is then averaged and reported as the read noise.  FFC is off.

[4] Electronic dynamic range. 20log (1023/Read Noise)

These values quoted in the above table are typical

 

Do you want to understand what parameters mean?  Then, click here.

 

Camera Responsivity

 

Note

White balancing will change the responsivity curves shown above.  The curves will be scaled by the channel gains.