Note
Camera Settings: 40ms integration time, default gain, FFC on, 12 bit mode
[1] Referenced with respect to 4095DN.
[2] Referenced with respect to frame mean
[3] Measured using the center 64X64 array of pixels over 32 frames. The standard deviation of each pixel is used to create another 48X48 matrix, which is then averaged and reported as the read noise. FFC is off. Measured at minimum gain (0dB)
[4] Electronic dynamic range. 20log (4095/Read Noise). Measured at minimum gain (0dB).
[5] Peak responsivity measured at 600nm in 10-bit mode at minimum and maximum gain. To find equivalent 12-bit responsivity, multiply by 4.
The values quoted in the above table are typical
